ZigBee Alliance members are using ZigBee today to build a wide variety of products. This page shows members who are building products that are Designed for ZigBee but are not yet ZigBee tested and certified. Please refer to the individual company's website for full product information and availability. For already certified products, please visit PLATFORMS or PRODUCTS.

If you want to submit your product, please download this FORM (Members only).

Products Designed For ZigBee

Adhoco Adaptive Home Control System - Adhoco's smart home solution comprises an intelligent central control unit in an attractive design, working as an OSGi-compliant residential gateway with internet connection, and featuring a ZigBee coordinator. A set of ZigBee-ready devices are available in similar design, including sensors for presence, illumination, temperature, humidity and windspeed, to control home appliances such as lights, blinds, windows, valves for radiator and underfloor heating. OEM partners are welcome to add their components and features to the system. The Adhoco smart home solution brings better comfort, higher security, lower energy consumption and attractive support features to your home.
Mio Modero R-3 Remote (MIO R-3) - The MIO R-3 communicates with the AMX Control System via ZigBee, which enables two-way device communication and seamless roaming. Users can walk throughout their home or place of business while receiving real-time information – such as current room temperature, lighting levels and dynamic music lists.	Mio Modero R-4 Remote (MIO R-4) - The MIO R-4 combines the convenience of a handheld remote with a touch panel interface. It communicates with the AMX Control System via ZigBee, which enables two-way device communication and seamless roaming. Users can walk throughout their home or place of business while receiving real-time information – such as current room temperature, lighting levels and dynamic music lists.
NetLinx ZigBee Gateway - The NetLinx ZigBee Gateway connects ZigBee devices and Repeaters with the AMX Control System.	NetLinx ZigBee Repeater - NetLinx ZigBee Repeaters extend the ZigBee network to provide comprehensive, broad wireless coverage with no "dead spots."
Wireless Lighting & Control System - Perfect for retrofit, this Wireless Lighting & Control System uses standard household wiring and replaces existing switches/dimmers with state-of-the-art radio-controlled 1, 2, 3 or 4-button Touchpad Dimmers. The touch of a button controls single room or all-house scenes using wireless communications—no separate dimmers and keypads required. Easily customized to match home décor.
SuperStat® Pro - Comverge's SuperStat Pro is a state-of-the-art "smart" thermostat. Capable of two way wireless communication, SuperStat Pro's clear LCD screen informs the user of important information, such as energy usage, monthly bill totals and even real time pricing. SuperStat Pro can be programmed online for added convenience. For more information on SuperStat Pro and other Comverge clean energy solutions go to www.comverge.com	PowerPortal® Home - Description: PowerPortal Home weighs less then 5 ounces, has a battery life of up to 2 months, and is one of the most portable IHD devices available. As an AMI ready display, PowerPortal Home shows messages that are clear and intuitive, making it easy for consumers to manage their energy usage and costs in real-time.
Daintree Networks Sensor Network Analyzer (SNA) - More than a sniffer, the SNA is a comprehensive and powerful solution that takes you from development through to testing, commissioning and maintenance. It provides unique visualization capabilities that show all network devices and interactions simultaneously, and intuitive tools that simplify complex tasks including multi-node captures and commissioning.	Daintree Networks 2400E Sensor Network Adapter - The 2400E extends the capabilities of Daintree's SNA software. This versatile adapter is a capture device (capable of multi-node captures), and can also join live networks to passively monitor and actively interact with devices, and to send and receive ZigBee standard and proprietary messages.
DevCom 01 ZigBee Module - The DevCom 01 ZigBee Module is a fast solution to the development of IEEE 802.15.4 and ZigBee applications. The module comes with a 24-pole connector with access to different I/Os. It contains an internal antenna as well as connector for external antenna. The module is based on Freescale’s MC9S08GT60 CPU and MC13192/193 2.4 GHz ZigBee compliant radio.	DevCom 02 ZigBee Module - The DevCom 02 ZigBee Module is a fast solution to the development of IEEE 802.15.4 and ZigBee applications. The module comes with a 24-pole connector with access to different I/Os. It contains an internal antenna. The module is based on Freescale’s MC9S08GT60 CPU and MC13192/193 2.4 GHz ZigBee compliant radio. It is available with standard or customized software.
ZigBee-Ethernet Gateway - The Z-gateway enables ZigBee networks to connect to the Internet. The CPU is a ColdfireTM MCF 52230, 10/100 Mbit, Ethernet ctrl. The supply can either be PoE or external supply. The gateway is remote programmable.	SLC - The relay for switched power outlet is intended for in-house and external ZigBee communication. Combined with the gateway, the SLC enables the end user to communicate with house hold appliances such as his coffee machine, washer or another electrically operated device.
SLC for DIN-rack mounting - This relay encompasses the same features as the SLC described above. However, this variant is for DIN rack-mounting meaning that you are able to switch off a whole section at the same time, e.g. switch off all appliances in the house except from the freezer, the alarm and similar.	DevCom 03 ZigBee Module - The DevCom 03 ZigBee Module offers a fasttrack approach to development of IEEE 802.15.4 and ZigBee applications. Based on the new Flexis series of microcontrollers and the low power radio IC from Freescale, the DevCom 03 module is a ready-to-use building block that can be mounted directly in any end equipment needing ZigBee, 802.15.4 or proprietary wireless data transfer at 2.4 GHz. The module has an internal antenna and comes with a 24-pole connector with access to multiple I/Os. The DevCom 03 ZigBee Module is available with standard or customized software.To build a complete ZigBee solution, the module is supported by the Freescale BeeKit development package. A utility will create the DevCom 03 as a hardware profile in the BeeKit environment, making firmware customization very easy.
HiPromatic miniBar - Installing the automatic HiPromatic system is as easy as Plug&Play - without wires or cables. Communication functions via the DOMESH wireless communication network, based on latest ZigBee technology. The D-win software ensures easy operation and safe profits and monitors the refreshment centres. The noiseless miniBars are available in the 30, 40 and 60 litre class with various options. Made in Germany in compliance with ISO 9001 and ISO 14001 they are equipped with the patented Fuzzy Logic software.
REX2-EA meter - Designed for future flexibility, the REX2 platform is both a smart metering endpoint and a HAN gateway. The REX2 supports the emerging needs of smart grid initiatives with extended memory, greater security, and remote upgradeability as well as support for numerous end-devices such as thermostats, displays and control switches. It provides bidirectional energy, power measurement, time-of-use (TOU) metering, interval data recording, and critical tier pricing.	REX2 EnergyAxis® System - EnergyAxis provides utilities with the tools and information needed to improve business operations and customer service, lower operating costs, and increase revenue and profits. In addition to supporting demand response and in-home solutions, this sophisticated standards-based communication network supports electric, gas and water utility applications. EnergyAxis also delivers remote connect and disconnect, outage detection and restoration notification, theft and leak detection, time-of-use metering, and prepayment options.
EM250 - True ZigBee system-on-chip, combining a 16-bit micoprocessor, Flash, RAM, a 2.4GHz 802.15.4 radio, and numerous debugging and development features. Application development is supported by a C-language development environment that includes the EmberZNet stack.	EM260 - The only ZigBee network co-processor available today, the EM260 is a 2.4GHz 802.15.4 radio with a Flash-based processor on-chip. The EM260 runs the EmberZNet ZigBee stack, exposing the top-level API over an SPI-based interface, allowing the developer to write their application in any microprocessor they choose.
EmberZNet - Ember's rigorously tested and field-proven EmberZNet ZigBee stack sets the bar for ZigBee stack performance.EmberZNet derives its robustness from Ember's years of experience fielding mesh network solutions. EmberZNet offers complete ZigBee compliance with additional enhancements for robustness and ease-of-use.	Ember InSight Development Environment - Ember's InSight Desktop is the most integrated ZigBee application debugging tool available. By providing developers with a complete view of their network in a graphical manner, InSight Desktop greatly reduces debugging effort and time to market.
Ember RF Eval Kit - The EM250/260 RF evaluation kit includes everything needed to assess RF-level connectivity in any environment you choose. This easy-to-use system is ready to go “out of the box” because there is no software programming required to perform tests. The RF Evaluation Kit can measure the EM250/260 RF chip functionality in normal mode and optionally in “boost” mode for those applications requiring a higher level of RF performance.	InSight Development Kits - The premier set of embedded wireless networking tools developed specifically for OEMs, the InSight Development Kit includes hardware, development tools, and software for embedded applications—everything you need to build intelligent, robust, decentralized device networks into your products. The software package includes a service-aware API that simplifies code development and lets you focus on your embedded applications. The Ember API is consistent across all products, providing an easy-to-use interface for rapid and uniform application development across the Ember platforms.
PowerTab - Energy Aware's PowerTab is an in-home display that uses the Zigbee Smart Energy profile to allow consumers to closely track electricity consumption and costs. The PowerTab's attractive design and user-friendly interface encourage energy conservation and facilitate increased data flow between utlitities and end users. For more information on the PowerTab and Energy Aware Technology, go to www.energy-aware.com.
MC13213 ZigBee(R) Platform - The 2nd generation of the ZigBee family of ICs, the MC13213 System in Package (SiP) integrates the MC9S08GT MCU with the MC1320x transceiver into a single 9x9mm LGA package. This reduces the external component count up to 40 percent, lowers the solution size up to 33 percent and the overall cost by up to 29 percent. Combined with Freescale's BeeKit(TM) ZigBee Protocol Stack, it provides the ideal platform for wireless sensing and control applications that require networks a complete ZigBee compliant mesh network.	BeeKit™ Wireless Connectivity Toolkit - Freescale's BeeKit™ Wireless Connectivity Toolkit ties everything together by providing an easy GUI driven tools for the configuration of Freescale's BeeStack™ ZigBee protocol stacks, eliminating the need to sift through hundreds of lines of codes in order to set parameters. The BeeKit allows developers to quickly start on their application development.
1321xDSK Development Kit - The 1321xDSK Developer's Starter kit is an ideal low cost development and demonstration kit. The kit come with everything you need to get started, including hardware boards, cables, batteries, power adapters, BeeStack™ and sample applications to create proprietary and standards-based peer-to-peer and star networks.	1321xNSK Development Kit - The 1321xNSK Network Starter Kit provides a solid basis for demonstrating and developing more complex networks, ZigBee mesh networks. The kit come with everything you need to get started, including hardware boards, cables, batteries, power adapters, BeeStack™ and sample applications.
1321x ZigBee™ Evaluation Kit - The 1321xEVK Evaluation Kit provides one of the most comprehensive kits for demonstration and development of a complete ZigBee mesh network. The kit come with everything you need to get started on development of ZigBee networks, including hardware boards, cables, batteries, power adapters, BeeStack™ and sample applications including Freescale’s ZigBee environment Demonstration application. The Kit also includes the Standard Edition of Daintree's Sensor Network Analyzer software and a Freescale 802.15.4 packet sniffer.
GreenPeak Lime CM-08 module - The GreenPeak Lime CM-08 module functions as a stand-alone communication system, integrating a transmitter/receiver, antenna, and low-power mesh network software. It features a transmit power amplifier to deliver 4x transmission range of non-amplified. The module utilizes an energy-harvesting ready interface to facilitate battery-free operation in a totally wireless environment.
OpenWay® - OpenWay by Itron combines smart meters and advanced two-way communications to deliver automated meter reading, time-based rates, mass-market demand response, and smart grid support to leading-edge utilities.
ComFu® - ComFu® is the new wireless standard for process analysis applications. It is part of the Protos® 3400 X modular process analysis system for measuring of pH, conductivity and oxygen. It supports ZigBee 2.4 GHz wireless data transfer between sensors and Protos® meter. A ComFu® set consists of two elements – a ComFu® E (End device) sensor-side radio transmission unit and a ComFu® C (Coordinator) meter-side antenna unit.
JN5139 Wireless Microcontroller - Jennic’s second generation 32-bit RISC single chip wireless microcontroller for IEEE802.15.4 and ZigBee wireless sensor network applications. It offers high performance microcontroller functionality with integrated radio, low power consumption and low cost, and is ideal for battery powered applications.	JN5139 Wireless Modules - Fully integrated extended range ZigBee wireless microcontroller modules, with onboard or external antenna options. They remove the need for expensive and lengthy development of custom RF board designs and test suites, enabling users to implement systems with minimum time to market at the lowest cost.
JN5139 Evaluation Kits - Jennic's evaluation kits provide a complete environment for the rapid development of wireless sensor network applications based on the JN5139 wireless microcontroller. The evaluation kits come with 5 nodes and a fully featured, unlimited software development kit allowing quick and easy product evaluation and development.
FlexBee™ 2430 Module - Based on TI’s 802.15.4 SoC & Z-Stack™ technology, FlexBee™ 2430 is one of the most powerful ZigBee-compliant solutions on the market. FlexBee delivers industry-leading 2.4GHz module performance in the areas of range, features and functionality. Its receive and power-down modes offer OEMs the lowest power consumption of any comparable transceiver—making it ideal for battery-powered applications.
RS-SE-24-01 - The RATE$AVER is an In-Home-Display device capable of communicating with ZigBee Smart Energy Profile Compliant Energy Service Portals (ESP) withn Utility Meters displaying energy usage data.
MeshNetics ZigBitT Wireless RF Module - ZigBit is a low-power, high-sensitivity 802.15.4/ZigBee module, capable of over 1,000 m of unamplified range. ZigBit is easy-to-integrate; its footprint is just a half square inch. ZigBee modules, along with MeshNetics' software, technical support, and design services help achieve faster time-to-market and significant cost savings for OEMs and system integrators.	MeshNetics MeshBean Development Board with Sensors - MeshBean is a development board with sensors. The 2-layer PCB board features ZigBit OEM module. Input options include DIP switches, 3 buttons, 4 ADC connectors, I2C light sensor and temperature sensors. Output is via 3 LEDs. Input/output options include USB and JTAG connectors, USART, 1-Wire and 9 GPIO pins.
iREMOTE® - Our unique iRemote®, now available worldwide, takes a quantum leap in simplifying how you can control audio throughout your home. This two-way wireless handheld RF device delivers complete zone-by-zone and system-wide control of your home audio entertainment system. The iRemote shows your favorite songs and audio sources on a brightly-lit, 2-inch LCD display for ease of use. With one press of the button, you can turn off all zones from your bed at night. Or turn down the volume in a kid's room from anywhere. When you Experience ICS, all the music everywhere is at your fingertips.
µTinyOne ZigBee 2.4 GHz OEM RF module - µTinyOne ZigBee is a low-cost ZigBee solution based on the TI CC2430 System on Chip (SoC). It occupies only 25 x 15 mm of space and it is about 3 mm high. Available with or without an integrated antenna, µTinyOne offers engineers the optimum choice for low-cost ZigBee integration into battery operated applications.	µTinyOne ZigBee 2.4 GHz USB dongle modem - 58 x 20 x 22 mm in size, including drivers for Windows 98SE/2000/XP and communicating through a virtual com port, the µTinyOne ZigBee USB dongle can be easily connected to a PDA through USB 1.1 / USB 2.0, thereby offering the possibility for the development of mobile ZigBee solutions for i.e. Automated Meter Reading.
TinyOne ZigBee 2.4 GHz ZCP - One RF Technology offers an up-to-date ZigBee Compliant Platform (ZCP) based on its TI CC2420 - the TinyOne ZigBee 2.4 GHz ZCP. The module is 38 x 21 x 3 mm in size, RoHS and WEEE compliant, features an embedded in-house ZigBee stack and it is fully upgradeable and configurable over the air (DOTA).
OPNET Modeler® - OPNET Modeler® accelerates network R&D and improves product quality through high-fidelity modeling and scalable simulation. It provides a virtual environment for designing protocols and devices, and for testing and demonstrating designs in realistic scenarios prior to production. OPNET Modeler supports hundreds of technologies including ZigBee®, WiMAX, UMTS, WiFi, and MANET.
RC 2200 - The RC2200 is a complete ZigBee-ready module with wireless star and mesh networking protocol stack supporting Full Function Device (FFD) and Reduced Function Device (RFD) operation with IEEE 802.15.4 compliant PHY and MAC layers. The complete shielded module is only 16.5 x 29.2 x 3.5 mm, optionally available with integrated antenna or RF connector. 128 kB flash memory, 32 digital and analogue I/Os, 8 channel 10 bit ADC, UART and SPI interfaces make it possible to embed the complete application in this tiny module.	RC 2300 - The RC2300/2301/2302/2304AT RF Transceiver Modules are a series of compact surface-mounted modules with integrated antenna specially designed for the ZigBee™ protocol stack for wireless star and mesh networks based on IEEE 802.15.4 compliant PHY and MAC layers. The modules are based on the CC2430/2431 SoC from TI.
RC2300-ZNM - RF module with complete ZigBee 2006 stack. Measures only 12.7x25.4x2.5 mm including shielding and integrated antenna. Exists as high power version (17dBm) in same footprint.
MG2400 - MG2400-F48 is a true single chip which is compliant to IEEE 802.15.4 and ZigBee™ standard. The chip integrates 2.4GHz radio transceiver, VCO, T/R switch, 1.5V regulator, RTC, 802.15.4 MAC, AES-128 bit encryption engine, and high-speed 8-bit microcontroller into a sigle die.	MG245X - MG245X series are 2nd generation ZigBee™ single chip solution from RadioPulse with enhanced RF features and integrated voice codec. MG2450/MG2455 support data rate higher than 250Kbps, which is suitble for applications requiring voice/video/audio data over ZigBee™ network.
LIME ZigBee Module - LM2400 is a ZigBee RF module consists of RF Transceiver, RF circuitry and 8051-compatible MCU and external components, integrating ZigBee certified stack software and 802.15.4 MAC protocol. LM2400 has several application interfaces such as 2 UARTs, 4-channel ADC, 10 GPIOs and 2 external interrupts. The integrated 802.15.4 MAC and ZigBee stack protocol firmware support multi-hop routing for reliable wireless communication.	ZigBee USIM Card - ZigBee USIM card integrates ZigBee single chip and USIM, for 3G mobile phone, turning the device as a gateway between ZigBee network and cellular/IP network to collect and display information. ZigBee-USIM mobile handsets can remotely monitor and control smart sensor networks in digital home or office, creating new value added services over converged networks.
ZigBee Development Kit - Mango-ZDK is a comprehensive set of hardware and software to test and develop full-scale ZigBee™ application using RadioPulse products. The software package includes Device Programmer, Packet Analyzer, Profile Builder, Profile Simulator and other utilities, along with zPulse, royalty-free ZigBee stack software developed by RadioPulse Inc.
Apogee Wireless - APOGEE Wireless is the industry’s first wireless building automation system network. Apogee Wireless enables field devices such as room controllers, I/O point modules, meters, and variable frequency drives to reside on a wireless mesh network. Additionally, battery-powered room temperature sensors are able to utilize this same wireless network to communicate with their respective controller. For more information go to http://www.us.sbt.siemens.com/bau/products/Wireless/default.asp
Telegesis ETRX2 ZigBee module - The ETRX2 module offers fast integration of ZigBee technology into your product. Based upon the EM250 single-chip solution from Ember Corporation this 37.75mm x 20.5mm module has FFD, RFD and router capability. Fully FCC and CE approved. Available in power amplified form for longer range. Comprehensive AT command set gives access to the ZigBee mesh networking stack. No embedded or radio expertise required.	Telegesis ETRX2DVKA Development kit - The Telegesis ETRX2-PA power amplified module offers boosted power whilst being a drop-in replacement for the standard ETRX2. Care was taken to retain the low deep sleep current to make this module ideally suited for battery operated end devices with the lowest transmit current in its class. Built around the EM250 system-on-a- chip from Ember Corporation the ETRX2-PA module can deliver up to 18dBm output (where permitted) which can result in ranges of over 1.6Km in open space. More practically this enhanced performance can be invaluable in maintaining indoor networks within difficult radio environments where more TX/RX power is needed.
Telegesis ETRX2USB ZigBee USB stick - Telegesis has added the ETRX2USB universal serial bus stick to its ETRX2 module range to offer an easy way to ZigBee enable personal computers. Using a virtual com port the Telegesis AT Command interface can be easily accessed by the application software. ETRX2 products are based upon the EM250 single chip solution from Ember Corporation.	Telegesis ETRX2CF ZigBee Compact Flash Card - Another addition to the Telegesis ETRX2 ZigBee module range is the ETRX2CF universal compact flash card which offers an easy way to ZigBee enable portable handheld devices. Via a virtual com port the Telegesis AT Command interface can be easily accessed by the application software. Custom firmware development is also supported.
Telegesis ETRX2EAP – ZigBee Ethernet Access Point - To accompany the Telegesis ETRX2 ZigBee module range the ETRX2EAP Ethernet Access Point offers an easy way to interact with remote ZigBee networks using Ethernet. Via telnet, or a virtual COM port the Telegesis AT Command interface can be easily accessed by the application software. Custom firmware development is also supported.	Telegesis ETRX2DVKA Development kit - This ETRX2 Development Kit provides a low cost, genuinely quick and easy, out-of-the-box construction of a working mesh network. Using the comprehensive Telegesis AT Command Dictionary and the simple to use Telegesis Terminal software package provided, it should take less than half an hour to set up a three-way ZigBee network and to begin detailed, in-depth assessment of the latest Ember ZigBee technology. Kit includes full Development Board, two module carrier boards and three ETRX2 modules.
Tendril Access™ - Tendril Access™ is a user-friendly, flexible access point that provides a functional gateway to any 802.15.4/ZigBee wireless sensor and control network (WSCN) from traditional computing platforms, such as PCs. Designed to serve as a gateway between wired and wireless networks, Ember and TI versions of Tendril Access come pre-packaged with simple-to-use Windows® drivers and associated APIs - all priced as low as $99. Like other products in the comprehensive Tendril™ suite, Tendril Access is just another way that Tendril helps you build a useful application, no matter what stage of the WSCN lifecycle you're in.	Tendril Deploy™ - Tendril Deploy™ is a ZigBee commissioning and diagnostics software tool that provides the simplest way to install devices in a ZigBee network and application. Complete with a default GUI, packaged diagnostics and an optional API, Tendril Deploy makes it fast and easy to set up a solid, robust, working wireless network that easily integrates with the rest of the networked world and conforms to your deployment rules, and verifies the operational integrity of the deployed ZigBee network and application. Like the other products that use the Tendril Network Operating Platform, Tendril Deploy is just another way that Tendril helps you build a useful ZigBee application across the entire product lifecycle.
Tendril Monitor™ - Tendril Network Operating Platform™ 2.0 is the expanded and improved version of the industry's first modular, extensible and open software platform designed to simplify and speed up the building, deployment and management of operational ZigBee® network applications. It can be deployed alongside existing ZigBee applications or used to build an extremely effective ZigBee application from the ground up. Open APIs enable developers to focus on developing the application; eliminating time spent on the underlying operating platform. Designed to scale from a simple PDA to a full data center, the Tendril Network Operating Platform helps manufacturers and integrators build, deploy and manage ZigBee applications quickly and easily.	Tendril Network Operating Platform™ 2.0 - Tendril Access™ is a user-friendly, flexible access point that provides a functional gateway to any 802.15.4/ZigBee wireless sensor and control network (WSCN) from traditional computing platforms, such as PCs. Designed to serve as a gateway between wired and wireless networks, Ember and TI versions of Tendril Access come pre-packaged with simple-to-use Windows® drivers and associated APIs - all priced as low as $99. Like other products in the comprehensive Tendril™ suite, Tendril Access is just another way that Tendril helps you build a useful application, no matter what stage of the WSCN lifecycle you're in.
WiSens® Classic Packet Sniffer/Analyzer TSBPRO01 is a complete product with the analyzer hardware and a PC based software running on Windows platform. WiSens® Classic captures 'Over-the-Air' IEE 802.15.4/ZigBee packets on a user selectable channel and displays them in a user-friendly graphical form on a PC console. The ability of WiSens Classic to capture and display communications packets translates to multliple benefits for engineers and technologists during development and testing of ZigBee stacks and applications, commissioning of ZigBee networks.
CC2430ZDK is designed to deliver the most powerful elements for ZigBee™ development in the market today. The kit is based on the CC2430 System-on-Chip, which includes the core of the CC2420 transceiver, an 8051 controller, flash memory and lots of useful peripherals.	CC2431ZDK - CC2431 ZigBee Development Kit provides a complete ZigBee development solution with an advanced hardware location engine that adds location capabilities to your ZigBee network.
CC2520DK - CC2520 Development Kit supports TI's Z-Stack 2.0.0 w/ support for ZigBee-2006 and ZigBee-2007 (ZigBee PRO) in conjunction with the MSP430 microcontroller family.	eZ430-RF2480 Z-Accel Demo Kit is a complete USB-based MSP430 wireless demonstration tool providing all the hardware and software to evaluate the CC2480 2.4GHz ZigBee network processor and the MSP430F2274 microcontroller.
TriBee USB - The TriBee USB dongle is designed and developed specially for ZigBee and IEEE 802.15.4. The dongle presents a quick, easy and inexpensive solution for customers wanting to have ZigBee connectivity in their PCs, PDA and smart phones. The TriBee USB dongle can be used to commission, manage, control, monitor you’re ZigBee network.	TriBee Module - The Module provides fully compliant wireless ZigBee connectivity for any application. The TriBee Module can be configured as a router, coordinator or end device and used for any ZigBee application. The TriBee Module offers the opportunity to reduce R&D costs, reduce time-to-market and minimize development risks. The module has both FCC and CE certification.
TriBee Router - The Router Increases the coverage/robustness of your network and uses the full potential of the ZigBee standard by using a mesh network. The router automatically stores messages for its sleeping devices. By using the TriBee Router building network infrastructure has never been easier.	TriBee Gateway - The Network Coordinator Gateway is the link between your ZigBee network and an access communication media. The gateway is the easiest way to connect to your ZigBee network either from inside your home via LAN/USB or from outside your home via Internet. The hardware consists of an Atmel ARM9 MCU which runs a Linux core that gives the developer full control to add new applications such as WEB-server, FTP-server or a database.
TSC Systems ZigBee Gateway - ZigBee Gateway offers one USB host and two USB clients for connection with PC, Settop box, HDTV and one Ethernet port for the connection between internet and ZigBee network. With ZigBee or IrDA remote controller, Home Device such as Light and Door Lock can be controlled through ZigBee gateway. The Hardware is capable of VoIP platform.	TSC Systems Home Device - Simple remote controller, light, outlet etc are based on IEEE802.15.4 and ZigBee Technology. Function to check and control the home appliance with remote controller, PC and mobile phone, whenever, wherever, will give the convenient life to you.
TSC Systems Security Sensor - Magnetic Sensor and Motion Detector Sensor are based on IEEE802.15.4 and ZigBee Technology. Emergencies that can happen at home, office or outside can be reported to the subscibers for secure living. Magnetic Sensor and Motion Detector Sensor are easy, affordable, simple to install and will boost your level of security without a major investment.
Viconics Wireless Gateway and Thermostat Products - Viconics Electronics Inc, Montreal, Canada is pleased to announce the official BETA release of the VT7000 series wireless 802.15.4 thermostats and Viconics Wireless Gateway product lines. The Viconics wireless gateway is designed to allow the integration of all VT7000 Wireless ZigBee based thermostats utilizing simple Echelon Lontalk SNVT's or BACnet Objects.
Please note that the products on this page have not undergone any of the strict testing programs of the ZigBee Alliance.